• gary@cheowseng.com
  • +86-769-88755330-816/830

Self-Tapping Screws For Various Materials: Read To Know More

Self-Tapping Screws For Various Materials: Read To Know More

In this article, we have discussed some materials by which you can use self-tapping screws. A taptite screw manufacturer provides the type of self-tapping screws that gives you a stronghold.

Self-Tapping Screws For Aluminum

Aluminum has several favorable characteristics that make it easy to work for you. When you use self-tapping screws on aluminum, select a self-tapping screw with a drill such as a point and sharp cutting blade threads that go down the whole length of the fastener. The self-tapping screw manufacturers design them to keep the thin metal from denting.

You place the screw directly on the aluminum sheet to use self-tapping screws. The short screw pointers will make its hole. Stabilize the screw so it does not tilt when it goes into the surface of the aluminum. Let the screw turn till it goes all the way through. You ensure that it does not over-tighten the screw since this can damage the metal or break the self-tapping screw.

The benefit of using self-tapping screws for aluminum is that they do not require pre-drilling, and you can remove it easily without damaging the metal. Moreover, you can also reuse it in the same material.

Aluminum metal in specific applications can vibrate, which may cause other fastener types to work loose. An instance of is when you use aluminum as a building material for boats. Boat engines will cause the boat’s frame to vibrate, which can affect other fasteners like nails or regular screws falling out. Tri lobular stainless steel self-tapping fasteners are perfect when vibration is present like their thread design decreases friction during thread forming while providing resistance to vibrational releasing.

Self-Tapping Screws For Plastic

Malleable metals are more rigid than wood and therefore are more prone to cracking. When you use self-tapping screws in plastic, be advised to drill a pilot hole beforehand screwing in the self-tapping screw. If you are installing hardware like hinges on plastic, you will need to avoid piercing the pilot hole all ways through the material for appealing reasons. The taptite screw manufacturer is leading when it comes to plastic fastening.

Self-Tapping Screws For Fiberglass

Fiberglass consists of glass fibers fixed in a resin. The amalgamation of glass fibers and resin creates a solid material. When you use self-tapping screws in fiberglass, you may find that the drilling tip of the screw becomes dull quickly since it comes into contact with the glass fibers, which leads to furiousness in the glass fibers and the gel coat. You must use proper installation techniques to avoid cracking.

Advantages Of Self-Tapping Threads:

  • Thread forming screws form the mating threads reducing the need for tapping.
  • The thread form is a regular thread, either metric or inch, meaning you can place thread-forming screws with conventional screws.
  • You may use it in tapped holes as well.
  • They offer superior prevailing torque than you can achieve with most locking screws.
  • Eliminates chips that effect from using thread cutting screws.
  • It requires low drive torque and offers excellent resistance to vibrational releasing.
Inquire Now